All Cascade Audio Engineering APS power supplies feature regulated and filtered outputs that provide clean power without the slightest hint of noise. The advanced circuitry utilized in our APS power supplies offer efficiency ratings of 86-90%. Their super light weight (6 - 14 lbs.), low-profile design allows for convenient mounting in or under a display vehicle (car, boat, plane, armored personnel carrier, etc.) or behind a display board.

Your new APS power supply may be used with or without a battery. However, when combined with a high quality battery, APS power supplies can supply transient surges up to 1000 amps. In display applications where use of a battery are not possible, installation of a Cascade Audio CAP-1 (1 Farad) or CAP-0.5 (1/2 Farad) capacitor is recommended. APS power supplies may also be connected in parallel for even higher current operation!

Because all APS Power Supplies utilize an advanced switching design, there is no low frequency transformer hum. Every power supply is equipped with a quiet running cooling fan. Additionally, when not in use APS Series Power Supplies are essentially off, reducing electricity usage.


APS15
200 Watt

Power Supply Features:
- Switching Power Supply
- Full Output at all Times
- Marine Ready
- Only Two Different Case Sizes
- The Professionals Choice Worldwide

Download FAQ Sheet

PART: APS15
Dimensions: 7" x 6.5" x 3.5"

 


APS30
400 Watt

Power Supply Features:
- Switching Power Supply
- Full Output at all Times
- Marine Ready
- Only Two Different Case Sizes
- The Professionals Choice Worldwide

Download FAQ Sheet

PART: APS30
Dimensions: 7.5" x 6.5" x 3.5"

 


APS45
600 Watt

Power Supply Features:
- Switching Power Supply
- Full Output at all Times
- Marine Ready
- Only Two Different Case Sizes
- The Professionals Choice Worldwide

Download FAQ Sheet

PART: APS45
Dimensions: 7.5" x 6.5" x 3.5"

 


APS55
740 Watt

Power Supply Features:
- Switching Power Supply
- Full Output at all Times
- Marine Ready
- Only Two Different Case Sizes
- The Professionals Choice Worldwide

Download FAQ Sheet

PART: APS55
Dimensions: 7.5" x 6.5" x 3.5"

 


APS75
1000 Watt

Power Supply Features:
- Switching Power Supply
- Full Output at all Times
- Marine Ready
- Only Two Different Case Sizes
- The Professionals Choice Worldwide

Download FAQ Sheet

PART: APS75
Dimensions: 10" x 6.5" x 3.5"

 


APS90
1200 Watt

Power Supply Features:
- Switching Power Supply
- Full Output at all Times
- Marine Ready
- Only Two Different Case Sizes
- The Professionals Choice Worldwide

Download FAQ Sheet

PART: APS90
Dimensions: 10" x 6.5" x 3.5"

 


APS100
1340 Watt

Power Supply Features:
- Switching Power Supply
- Full Output at all Times
- Marine Ready
- Only Two Different Case Sizes
- The Professionals Choice Worldwide

Download FAQ Sheet

PART: APS100
Dimensions: 10" x 6.5" x 3.5"

 

 

 Cascade Audio Engineering  Bend, Oregon USA Phone: 541.389.6821 • Fax: 541.389.5273 • E-mail: [email protected]
 © 2013 Cascade Audio Engineering, Inc., All rights reserved.

 

 

 

 

 

Automotive Noise Control Automotive Audio Enhancement APS Power Supplies Commercial / Residential Marine